STANDARD EQUIPMENT

• Fresh water heat exchanger cooled engine with gear driven self priming raw water pump and ceramic seals
• Fresh water cooled exhaust manifold within heat exchanger / header tank assembly
• Rear mounted turbocharger with insulation cover
• Air intake
• High inclination sump and engine mounted drain pump
• Spin-on element lube oil filter
• Low pressure fuel system with high mounted fuel filter
• Totally enclosed engine breather
• Electric stop solenoid
• Alarm switches and warning siren
• SAE 4 backend

OPTIONAL EQUIPMENT

• Marine Transmission
  ZF Hurth HSW 250A
  ZF Hurth HSW 250H
  Newage PRM 260D
• Electrical
  12 volt insulated or negative earth electrics including 70 amp alternator
• Exhaust Outlets
  Variable angle water injected outlet.
• Instrumentation
  Single and dual station instrumentation including audible and visual alarms with gauges, senders, switches, loom and varying lengths of interconnecting cables. A simple tachometer panel is also available.
• Mountings
  Optional brackets with 460 or 550mm bearer centres
  Flexible mounts with stud adjustment
• PTO
  Crankshaft PTO extension shaft with drive pulley option
• Miscellaneous
  Solid and flexible output couplings
  Fuel pre-filter with water alarm
  Flexible fuel feed and return pipes
  Calorifier connections
  Tool Kit
  On board parts kit