STANDARD EQUIPMENT

• Fresh water heat exchanger cooled engine with gear-driven, self-priming raw and fresh water pumps.
• Fresh water cooled exhaust manifolds.
• Twin fresh water cooled turbochargers.
• Raw water cooled charge air coolers.
• Dry type air cleaners.
• Closed circuit engine breather system.
• High inclination lub. oil sump with lub. oil drain facility.
• Fuel system including twin spin-on filters and pre-filter with water alarm.
• Fresh water cooled lub. oil system with spin-on lub. oil filters.
• SAE 1 flywheel housing with flywheel suitable for range of marine reverse/reduction transmissions.
• Adjustable front engine support bracket.
• Engine stop solenoid.
• Single water-injected exhaust outlet.
• Insulated return 24 Volt marine electrics including 75 A alternator.
• Engine-mounted transmission oil cooler.
• On board parts kit.
• Service manuals.

OPTIONAL EQUIPMENT

• Marine transmissions
  ZF Marine BW 165
  ZF Marine IRM 350 PL
  ZF Marine IRM 350 A
  Optional Trolling Valve
• Electrical
  Radio suppressed engine electrics
• Instrumentation
  Single or dual station electrical instrumentation with audible/visual alarm system, complete with sender units, switches and wiring harnesses.
• Exhaust
  Single dry exhaust outlet
• Power Take-Off
  Front end P.T.O. extension shaft with key drive
  Multi-groove P.T.O. pulleys
  P.T.O. capability on gearbox
• Electrically operated bilge pump
• Mountings
  Rear engine mounting brackets – adjustable
  Flexible engine mountings
• Sump drain pump