STANDARD EQUIPMENT

• Fresh water heat exchanger cooled engine with gear driven self priming raw water pump and ceramic seals
• Fresh water cooled exhaust manifold within heat exchanger / header tank assembly
• Air intake with re-usable elements
• Lube oil sump and engine mounted drain pump
• Spin-on element lube oil filter
• Low pressure fuel system with high mounted fuel filter
• Totally enclosed engine breather
• Electric stop solenoid
• Alarm switches and warning siren
• SAE 4 backend

OPTIONAL EQUIPMENT

• Marine Transmission
  ZF Hurth HBW 250
  ZF Hurth HSW 250A
  Newage PRM260D
• Electrical
  12 volt insulated or negative earth electrics including 70 amp alternator
• Exhaust Outlets
  Variable angle water injected outlet or dry outlet
• Instrumentation
  Simple yachtsman’s single station 12 volt panel including audible and visual alarms complete with gauge, senders switches, loom and varying lengths of interconnecting cables.
  Single or dual station deluxe 12 volt panels
• Mountings
  Optional brackets with 460 or 550mm bearer centres
  Flexible mounts with stud adjustment
• PTO
  crankshaft PTO extension shaft with drive pulley
• Miscellaneous
  Solid and flexible output couplings
  Fuel pre-filter with water alarm
  Flexible fuel feed and return pipes
  Calorifier connections
  Tool Kit
  On board parts kit
  High inclination sump for racing yachts