STANDARD EQUIPMENT

• Fresh water heat exchanger cooled engine with gear driven self priming raw water and fresh water pumps
• Silicone hoses
• Fresh water cooled exhaust manifold
• Wastegated turbocharger with insulation cover
• Raw water cooled charge air cooler
• Air intake filter with cleaner element
• High inclination engine sump, top access dipstick and engine mounted sump drain pump
• Closed breather system
• Twin spin-on element lub. oil filter
• Integral plate engine lub. oil cooler
• High mounted single element fuel filter
• Thermostart cold start
• Crankshaft pulley with twin groove PTO facility and viscous damper
• Manual control adaptation parts
• SAE 3 housing with flywheel suitable for a range of marine transmissions
• Water injected exhaust outlet
• Solid four point engine mounting brackets
• 12 volt insulated return marine electrics, including 70 amp alternator with belt guard
• Electric stop solenoid
• Alarm switches and warning siren

OPTIONAL EQUIPMENT

• Marine transmissions
  ZF Marine IRM 220A
  PRM 601D
• Electrical
  24 volt insulated return marine electrics, including 40 amp alternator, Radio suppressed electrics
• Instrumentation
  Single and dual station instrumentation incorporating audible/visual alarms and gauges complete with senders, switches and varying lengths of interconnecting cables
• Exhaust Outlet
  Variable angle water injected outlets including high rise
• PTO
  Crankshaft PTO extension shaft with pulley drives
• Mountings
  Flexible engine mountings with adjustment shims
• Miscellaneous
  Solid or flexible output couplings
  Tool kit, On board spare parts kit
  Engine mounted electro-magnetic bilge pumps
  Calorifier connections
  Fuel pre-filter with water alarm
  Fuel feed and return pipes
• A comprehensive range of accessories are available including controls and sterngear